- Products -
Model：CT-SMZW2013-FBR
Radio protocol：Z-Wave
Power supply：DC 12-24V
Battery type：CR123A
Power consumption（VDC operation）：0.4W
Output terminals maximum current carrying capacity：25mA
Maximum voltage at output terminal：40V(AD or DC)
Radio Frequency：868.4MHz EU; 908.4MHz US; 921.4Hz ANZ; 869.2Hz RU
Range：up to 50m outdoors, up to 30m indoors (depending on the building materials used)
Operational Temperature：0℃-40℃
Measured Temperature：-20℃-100℃
Temperature measuring accuracy：0.5 ℃(within 0 to 40 ℃)
Operational temperature in VDC powering mode：-20-70℃
Dimension：72 × 28mm
1.Compatible with any Z-Wave network controller
2.The Flood Sensor signal can be sent to alarm system through a NC
3.Battery or VDC powered
4.Built-in temperature sensor
5.Theft protection
Flood Sensor is a universal, Z-Wave compatible sensor. The device can be hard wire (12 or 24V DC) or battery operated (battery life 2 years). Flood detection is signaled through siren and LED diode blinking. Additionally, the Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC (normally closed) contact terminal.
( Taiwan ) HIOTH
Rm.6,4F.,No.120,Ciaohe Rd.,Jhonghe Dist.,New Taipei City 23584,Taiwan.
+886-02-22460152
+886-02-22460150
vicky@hioth.com
( Shanghai ) HIOTH
6F, No.580, Tian Yao Qiao Rd, Xu hui Dist., Shanghai City, China
+86-21-53521976
+86-21-53521976
h18h@hioth.com
(SuZhou) HIOTH
301 West, 3rd floor, No. 9, Ruian Lane, Ping Sheng Road, Suzhou Industrial Park
+86-21-53521976
+86-21-53521976
h18h@hioth.com
IOS／Android QRcode(Simplified)
IOS／Android QRcode(Traditional)
Copyright © 2017 HIOTH All rights reserved .
 |
